BXMLX - 6-A SPEEDHIDE ALKYD SEMI GLOSS

  • MSDS: BXMLX
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: 6-A SPEEDHIDE ALKYD SEMI GLOSS
  • National Stock Number: 6850-00F040843
Product Identification

Product ID:6-A SPEEDHIDE ALKYD SEMI GLOSS
MSDS Date:11/09/1987
FSC:6850
NIIN:00F040843
MSDS Number: BXMLX

Responsible Party
PPG INDUSTRIES INC
1 PPG PL
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 412-434-3131

Info Phone: 412-434-3131

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

1), CALCIUM CARBONATE,

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 35%

ACGIH TLV: 10 MG/CUM


TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN, IARC

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),

CAS: 64742-48-9

Fraction By Weight: 35-45%


FILM FORMERS ROSINS, AND ADDITIVES (PROPRIETARY)

Fraction By Weight: 25%


INERT RESINS & PIGMENTS

Fraction By Weight: 25%


ADDITIVES (CAS # 24937-78-8)

Fraction By Weight: 25%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES:
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: VAPOR & SPRAY
MIST MAY BE HARMFUL. AVOID LONG-TERM & REPEATED CONTACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION, VISUAL
DISTURBANCES, DRYNESS, CRACKING, SWELLING.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: REMOVE PROMPTLY BY WIPING,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE CPR & OTHER SUPPORTIVE MEASURES IF
NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:120F
Lower Limits:0.7
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE. WEAR SCBA. (SEE SUPP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. TOXIC GASES MAY FORM WHEN PRODUCT IS
CONTACTED BY FLAME/HOT SURFACES.

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
W/PROPER PROTECTION IS PERMITTED IN AREA. REMOVE SOURCES OF
IGNITION. TAKE UP MATERIAL W/SAWDUST, VERMICULITE/OTHER ABSORBENT
MATERIAL & PLACE INTO CONTAINE RS FOR DISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
COMBUSTIBLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.
WELDING/BRAZING/FLAME-CUTTING ON SURFACES COATED W/THIS PRODUCT MAY
PRODUCE FUMES.

Exposure Controls

Respiratory Protection:USE A SUITABLE RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATIONS <
EXPOSURE LIMITS.
Protective Gloves:NITRILE/NEOPRENE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:GLOVES/POLYVINYL ALCOHOL. PROTECTIVE
CLOTHING, IMPERMEABLE APRON.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
FIRE PROC CONT'D: WATER SPRAY MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILDUP & POSSIBLE AUTOIGNITION/EXPLOSION WHEN
EXPOSED TO EXTREME HEAT.

Chemical Properties

Boiling Pt:B.P. Text:212-467.6F
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:1.1-1.3
Evaporation Rate & Reference:(BUO AC = 1): <13
Solubility in Water:<1
Percent Volatiles by Volume:55-58

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPS > 120F, HEAT, FLAME, HOT SURFACES.
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY, IAW/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.